Fitting
The Premier Rake Back lip is supplied with pre-attached adhesive tape suitable for non-porous surfaces.
Degreasesurfacebeforeinstallation.
Prior to removing the backing tape, lay the nosing in position and mark the position of the back edge with pieces of masking tape, this will be your guide for positioning the nosing during fitting. This needs to be done as it gives the exact final position of the nosing allowing for variations in the rake of the risers.
Care and Maintenance
Satin Brass and Polished Brass Trims: Lemon wipes will remove light tarnishing. However, to keep the brass looking like new these two finishes will need to be polished from time to time with a propriety brass polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.
Satin Nickel, Chrome, and Brushed Chrome: Lemon wipes will remove light tarnishing. These finishes will need to be polished from time to time with a propriety metal polish. Ensure that you follow the instructions on the tin and protect your flooring during polishing.
Pewter, Antique Bronze and Antique Brass: Lemon wipes will remove light tarnishing. If these finishes become contaminated and marked the only option is to polish them with a propriety metal polish and allow them to age again naturally. Ensure that you follow the instructions on the tin and protect your flooring during polishing.
Vacuum Cleaning. Only vacuum up to the trim edge then use the soft brush attachment to vacuum along the edge of the trim, if not, the steel base plate and plastic wheels of your vacuum cleaner will scratch and mark your Premier Trim.